Clicky

ADVERTISEMENT

Solving the problem of brick pavers: It’s all in the sand

Of all the options available for hard surface paving of driveways, walkways and patios, I like brick pavers the best. They look great, they survive the harsh freeze/thaw cycles of a Canadian climate much better than other masonry or asphalt, and they’re well-suited to do-it-yourself installations.

The only hitch with pavers is the space between bricks. Ordinary sand typically used to fill these gaps is prone to washing out, especially with the more interesting, round-edged and tumbled pavers. Loss of sand leaves unsightly gaps that invite weeds, ants and brick movement, which is why I made attempts at solving the old paving brick sand problem.

Brick pavers & the sand problem

The first time I did something about the issue was in 2004. I used a pressure washer to remove what was left of the ordinary sand I used between pavers when I originally installed a brick pathway at my house in 2001.

ADVERTISEMENT

I replaced that sand with a type of polymeric sand made especially for the job. It hardens in the presence of water and the results were much better than before. Better, but not perfect.

It often takes time to properly assess home improvement products and, after seven years of watching polymeric sand, I could see a weakness unfolding. Although the polymeric did harden well after first contact with water, the hardened sand didn’t have the ability to remould itself to the changing position of bricks as they inevitably move a little from autumn to winter and back to spring again.

This lack of ability to re-soften in the presence of moisture, then remould to a new shape, is the reason why polymeric sand disappeared slowly from my installation in chunks. It’s also why I sat up and took notice when an alternative product came along.

ADVERTISEMENT

Sand that re-softens

Mike Reihm is a graduate of the University of Guelph and he’s noticed the same problems with paver sand that I did. That’s why he harnessed his knowledge of chemistry to create an alternative he calls EnviroSAND.

What I’ve seen so far convinces me the long-term performance is better than what I’m used to with anything else. The ability to re-soften in the presence of water and re-harden again into a new shape is the reason why.

brick paver sand
Dry EnviroSAND on the right, and moistened EnviroSAND on the left. The ability to absorb moisture again and re-soften is the main advantage offered by this product.

If you take a small pile of EnviroSAND and wet it, the dry granules turn into a dough-like mixture that holds together without being sticky. This is what happens as the product is activated with mist from a garden hose after it’s worked into cracks between pavers. Let this mixture dry and it hardens enough to stay put firmly.

ADVERTISEMENT

Moisture from regular rain is enough to reactivate EnviroSAND and make it flexible again, though during my tests it still held together and resisted washing out, even while soft. This is a powerful combination of qualities, and I know from experience that it can make all the difference.

Installing sand correctly

As far as installation goes, EnviroSAND flows very well out of the bag and is easier than regular sand to work into gaps between pavers. Make sure your installation is bone-dry before applying the sand, with no chance of rain for the day.

Sweep it into cracks, work it down as far as it will go with a gas-powered compactor, then sweep the surface completely clean. The compactor introduces vibration to each paving brick, jiggling EnviroSAND down into the cracks completely.

ADVERTISEMENT
brick pavers steve maxwell pathway interlock
Gentle application of a mist of water is essential for activating EnviroSAND. This pathway is at the back side of my house.

When the only remaining sand is in the gaps, gently water the surface to activate it. For flagstone installations with larger gaps between 10 and 25 millimetres, EnviroSTONE is a companion product made with bits of crushed stone in the mix for added strength over wider spaces.

While it’s tempting to think that optimizing your home is all about big ticket items, that’s not entirely true. I’ve found a lot of benefit comes from solutions that solve small but annoying problems.

Even the best installations of brick pavers won’t live up to their full potential when finished with ordinary sand, though most homeowners don’t realize this until it’s too late. Now that you know, you can aim for something better.

ADVERTISEMENT

About the Author

Steve Maxwell

Steve Maxwell

Steve Maxwell has been helping Canadians with home improvement, gardening and hands-on living since 1988. Visit BaileyLineRoad.com for videos, stories and inspiration.

ADVERTISEMENTS

THANKS FOR VISITING!

Join our mailing list and GET YOUR FREE Homeowner’s Mini-Guide
Whether searching for your first home, preparing to upsize or downsize, or mulling over a renovation, this guide provides valuable resources and tips.