Clicky

ADVERTISEMENT

Choosing windows: What you need to know

If you’re serious about the quality of windows in your new home or renovation, you face a challenge that goes beyond just signing a cheque to pay for them; you need to be involved in choosing them.

It takes work to come to an informed opinion about window quality these days. Even experienced builders sometimes choose by nothing more than their gut feelings about various brands. You can do much better.

It always pays to be your own watchdog when it comes to building and renovation, and for this you need hard facts. That’s what I’m giving you here. At the most basic level, you need to pay attention to three areas:

ADVERTISEMENT
  • Technology: You need a basic understanding of the nuts and bolts of modern window design, construction and installation to make an informed choice about which window makes sense for a given application.
  • Performance: Just because a pretty, double-page advertising spread claims that a particular brand of window is best at sealing out drafts and rain doesn’t mean it actually is. You need third-party assessment to be sure.
  • Installation quality: You can have the world’s finest windows, but if they’re not put in correctly, they could become a miserable failure.
steve maxwell choosing windows
Windows matter a great deal, not just in terms of energy efficiency but also when it comes to looks. I built this round window from western red cedar, but most windows are pre-made and ready to install. Photo: Steve Maxwell

Choosing windows: Technology

Perhaps the least important consideration you’ll face as you start to shop for windows is also one of the most attractive. While it’s tempting to hold strong opinions about the relative quality of, say, aluminum clad wood versus vinyl, there are more important things to look at than just frame materials.

Wonderful windows are made using many popular materials these days. Manufacturing standards, design features and installation skills hold the most sway in window performance. It’s too simplistic to say that fibreglass is better than vinyl, or clad wood is better than aluminum. There’s more to it than that.

Low-e coatings

You won’t be window-shopping for long before you run into the term “low-e.” The average person usually doesn’t know what this means, but you should. It’s short for “low emissivity,” and it refers to the ability of glass to resist radiant heat transfer.

ADVERTISEMENT

The low-e feature is added to windows by application of a clear coating on the glass, and that’s a good thing. It’s also become universally available in the industry. Low-e may be put forth as a big thing by a window salesperson, but while it is important, it’s pretty much universal on new windows.

Although low-e coatings add 10 to 15 per cent more to the cost of windows, they can reduce energy consumption by 30 to 50 per cent. It’s a good deal. Low-e also reduces harmful ultra-violet rays by as much as 75 per cent, reducing sunlight damage to interior surfaces.

Argon gas between panes

Another common feature is argon gas between the layers of multi-pane glazings. Argon offers more insulation value than dry air, so it’s commonly used to boost thermal performance of windows. Think of it like invisible insulation stuffed between the pieces of glass.

ADVERTISEMENT

Argon gas is an optional feature on most windows, and it does offer real benefits — as long as the gas remains between the panes, of course. It’s not unusual for leaks to develop between panes and argon to be lost over time.

Warm edges and a clear view

steve maxwell
The plastic strips that separate panes of glass in this double-pane window help to reduce window condensation around edges. Photo: Steve Maxwell

When outdoor temperatures plummet in winter, windows everywhere fog up. That’s what happens when warm, moist, indoor air cools down and condenses in contact with cold panes of glass. But it doesn’t have to be this way.

And while it’s true that modern double- and triple-pane glazings have made this problem less common, there’s more involved here than just the glass. The design of multi-pane systems also has an influence on window condensation, too.

ADVERTISEMENT

All double- or triple-pane glazings include solid spacer strips of material around their edges. These spacers separate the panes of glass while forming the edges of multi-pane units.

Traditionally, spacers have been made of aluminum, but that’s starting to change, for the better. Since aluminum is highly conductive of heat, it can lead to cold zones around the perimeter of windowpanes, and this can mean condensation and excess energy loss in these areas.

A design feature generically called “warm edge glazing” eliminates this problem by replacing aluminum spacer strips with plastic ones. It’s a small detail, but one worth asking for. You can see it in the photo above.

ADVERTISEMENT

Choosing windows: Performance

Do your windows sweat during cold weather? This video explains why:

 

Assessing window performance is something that varies from country to country, at least to an extent. To reduce confusion experienced by window shoppers in Canada, the Canadian Standards Association (CSA) offers one of the few independent performance assessment standards for windows anywhere. And it’s not just about energy efficiency, but also about leak resistance and overall window performance.

ADVERTISEMENT

The overall CSA standard is called A440.2-14, and it rates the effectiveness of windows under conditions of wind and driven rain, as well as energy performance.

The A440 standard is getting to be more and more widespread and used as part of other certification programs such as EnergyStar. Look for the A440 designation in the fine print on certification stickers.

Just remember that not all windows made by a listed company meet the CSA standard. It’s a model-by-model thing, not necessarily a company-wide thing.

ADVERTISEMENT

Assessment stickers for a common U.S. rating entity, the National Fenestration Rating Council (NFRC) can be found on some products sold in Canada. The published numbers allow a direct and detailed performance comparison between competing windows. Click here for a searchable database of NFRC-approved windows (plus doors and other related products).

Choosing windows: Installation quality

Another Canadian innovation to help you win the window game is called the Window Wise Program. It’s a system of installer training and certification, random field inspections of completed window installations, and a minimum list of technical standards for windows covered under the Window Wise umbrella.

Besides including the CSA A440 standard, Window Wise windows feature:

ADVERTISEMENT
  • Thermally effective frames and sashes
  • Low-e glazings
  • Sealed glass units filled with insulative argon gas, and the physical strength and design necessary to meet forced entry resistance requirements.

 

Help from government

The federal government is committed to helping boost the energy performance of houses. This could mean a rebate on your replacement windows and other energy upgrades. Click here for a detailed list of energy incentives and rebate programs.

Don’t forget the flashing

steve maxwell choosing windows
These days “flashing” isn’t always made of metal. This self-sticking flashing around a window I installed on a new build works well and is easy to use.

Sometimes the most important building products are the ones that can’t be seen when your project is complete, and this is the case with window flashing.

ADVERTISEMENT

Although it’s easy to spend a couple thousand dollars on each new window that goes into a project, there’s a strange reluctance to pay just a few dollars more for the assurance that the installed windows will remain leak-free forever. And part of this reluctance has to do with the appearance of new window designs.

There’s something you need to be careful about here. Since most windows come from the factory with a mounting flange around the edges of the exterior frame, many people mistakenly believe they can simply slip the window in place, tuck the building wrap over the top, then nail it all down through all those oval holes around the flange edges.

While this might seem good enough, can you really be sure? It’s often a deficient approach. Small leaks can go undetected for years, encouraging frame rot and internal decay around windows that look just fine on the outside.

ADVERTISEMENT

You need to do more to ensure driving rains won’t make it into the structure of your building. And this means revisiting the old topic of flashing, though with a modern twist.

New materials mean that today’s best self-sticking window flashing products are easy to use and much more effective than traditional flashing options. They use a combination of metal and self-sticking membranes to ensure absolute resistance to water intrusion.

When coupled with a good weather-resistant barrier applied to exterior walls, window flashing is the cheapest insurance you can get to protect against hidden water leaks.

ADVERTISEMENT

When it comes to window quality, there’s more involved than meets the eye. That’s why it pays to know more about your choices than just what window advertisements would have you believe.

Since a large portion of household energy consumption is spent on heating and cooling, seek quality when choosing windows. Take the time to drill down to find solid information and you can be sure you’re getting all the window quality needed for long-lasting, energy-efficient results.

About the Author

Steve Maxwell

Steve Maxwell

Steve Maxwell has been helping Canadians with home improvement, gardening and hands-on living since 1988. Visit BaileyLineRoad.com for videos, stories and inspiration.

ADVERTISEMENTS

THANKS FOR VISITING!

Join our mailing list and GET YOUR FREE Homeowner’s Mini-Guide
Whether searching for your first home, preparing to upsize or downsize, or mulling over a renovation, this guide provides valuable resources and tips.